HPM47W-RPN 4-20mA 0-5V Piezo Sensor Chemical Industry Level Sensor

• Customization: Available
• Type: Level sensor
• Output Signal Type: Analog Type
• Model NO.: HPM47W-RPN
• Production Process: Ceramics
• Material: Ceramics
• IP Rating: IP68
• Certification: ISO9001
• Customized: Customized
• Sensor Type: Pressure Sensor
• Pressure: 0~0.5...400mH2O
• Over Pressure: 2 times the full scale
• Accuracy: 0.2%F.S.
• Long-term Stability: 0.1%FS/year
• Supply: 24VDC
• Output: 4-20mADC, 0~5VDC
• Working Temp: -10~70ºC
• Protection of Shell: IP68
• Transport Package: Carton
• Trademark: HIGHJOIN
• Origin: China
• HS Code: 90262010
• Production Capacity: 50000 Pieces / Year

Product Description

- High-purity ceramic material (96% Al2O3) sensor
- Whole welding process Fluorine rubber ring sealing 
- Whole potting process
- high molecular sieve, prevent dew
- Built-in weight block in product

 

Product Parameters

 

Pressure Range
Rated range (Gauge,kPa)	50	100	200	500	1000	2000
Min range (Gauge, kPa)	40	60	120	250	500	1000
Overload (kPa)	100	200	400	1000	1500	3500
Note:The measuring unit can be converted into mmH2O@ 4ºC, inH2O@4ºC etc When m, mm, etc. are used as units, please give the density value of the measuring medium

 

Measurement Medium
Medium Type	Any of various liquids compatible with contact materials

 

Output Signal/Power Supply
Standard	Two wires:4~20mADC                            /Vs=10~30Vdc
Standard	Two wires:4~20mADC+HART               /Vs=12~32Vdc
Standard	Three wires:0~5V etc                               /Vs=10~30Vdc
Standard	Four wires:Modbus-RTU/RS485             /Vs=3~8Vdc or 10~30Vdc

 

Charatistics
Accurate	±0.5%F.S.(Typical) ±0.2%F.S.(HART) * Accuracy refer to IEC 60770(nonlinear, hysteresis, repeatability)
Load Resistant	4~20mADC two wires:RL≤(U-10)/0.02Ω 4~20mADC+HART two wires:RL≤(U-12)/0.02Ω Voltage three wires:RL>10kΩ
Long Stability	±0.2%FS/year
Response Time	About 1ms
Boot time	≤3s

 

Temperature drift Charatistics
Temperature Compensation Range	-20~80ºC
Zero Temperature drift	±1.0%FS(within Temperature Compensation Range)
Full Temperature drift	±0.8%FS(within Temperature Compensation Range)

 

Environment
Temperature Range		Working Environment Temperature: -10~70ºC Measurement Medium Temperature: -10~70ºC Storage Temperature: -30~80ºC
Protection Grade		IP68
Electrical Protection
Short-circuit protection	Permanence
Reverse Polarity Protection	No damage, circuit not working
Electromagnetic Compatibility	Compliance EN61326
Mechanical stability
Vibration	20g(20~5000Hz)
Shock Resistant	20g(11ms)
Insulation
Insulation Resistant	>100MΩ,500VDC
Insulation  Strength	500VAC 50Hz Test voltage,1min no breakdowns and arcs

Strcture Material:

Code	Position	Instruction
DF	Probe Housing	PVDF
PC		PVC
PP		PP
M5	Sensor	Ceramic Al2O3 96%
F1	O-ring	FKM(Temperature range -20~200ºC)
F2		FFKM(More anti-corrosion,temperature range -25~300°)
FE	Cable	PTFE cable,outer diameter(7.2±0.2)mm
PU		PU cable,outer diameter(7.2±0.2)mm

 

Weight (Unit:g)

 

Probe					Cable
Housing Material	PVC	PP	PVDF		Cable material	PTFE	PU
Weight	~480	~430	~530		Weight(1m)	~60	~50

Dimension (Unit:mm)

* The size is the distance between the induction diaphragm and the bottom
 

Installation Instructions

 

Thread installation (W1) dimension

weight:~450g

 
1.Used for fixing and supporting the whole product on the top
2. Besides G1 thread, other threads can be customized if needed



Used to secure and support the entire product on top

1. Threaded Mounting (W1)                           4.  Wire clamp (W8)
2. Top connecting weight hammer (W2)        5.  Protective tube
3. Pressure transmitter                                   6.  Bottom connection heavy hammer (W3) *

*Bottom connection hammer (W3) is not applicable to HPM47W-RPN model, but can be used for other sub-models of HPM47W

Electrical Connection:




4 ~ 20mADC two-wire output transmitter electrical wiring diagram


Three-wire voltage output transmitter electrical wiring diagram

MODBUS-RTU /RS485 output transmitter Electrical wiring diagram
 

Ordering Guide

Company Profile

Certifications

FAQ

1.    Q: Are you manufacturer or trading company?
        A: We are manufacturer which focuses on sensor for 10 years.

2.    Q: What's your quality control system?
        A: MC, ISO9001, CE Certificated.

3.    Q: What is the warranty of your products?
        A: Our warranty time is 18 months after shipment.
 

4.     Q: What is lead time of your product?

         A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.
 

5.     Q: Do you provide customized products?

         A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.
 

6.     Q: What is your MOQ?

        A: We have no MOQ limit, small quantity order is acceptable.
 

7.      Q: What's the transport?                                                              

        A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.
 

8.      Q: What is your terms of payment ?
           A: We could accept T/T, Paypal, WestUnion.