ecnomical low cost 50bar 4-20ma 0-5v Metri-Pack DN43650 Pressure Transmitter For HVAC

• Customization: Available
• Type: Normal Pressure Transmitter
• Structure Type: Ceramic Pressure Transmitter
• Model NO.: HPM135
• Measuring Medium: Liquid Gas Stream
• Accuracy Grade: 0.5G
• Pressure range: 0~50bar (Gauge)
• IP Rating: IP65
• Certification: ISO
• Customized: Non-Customized
• Sensor Type: Ceramic Sensor
• Overpressure: 2 times the full scale
• Accuracy: 0.5%FS
• Long term stability: 0.5%FS/year
• Pressure interface: 7/16-20UNF male, etc
• Electronical interface: Metri-pack, or DIN43650, M12x1
• Supply: 24VDC or 5V
• Output: 4~20mADC, voltage, etc
• Housing material: SS304, 316L(option)
• Medium Temp: -35~120℃
• Working Temp: -20~85℃
• Storage Temp: -40~85℃
• Protection of Shell: IP65
• Response time: ≤10ms
• Sealing ring(wetted part): CR ring
• Transport Package: Carton
• Trademark: HIGHJOIN
• Origin: China
• HS Code: 90262010
• Production Capacity: 50000 Pieces / Year

Product Description

Overview

HPM135 pressure transmitter for the refrigeration industry uses a high-performance ceramic sensor, combined with a high-precision electronic conditioning circuit, and is assembled and produced through strict technological processes. This product is cost-effective and has a variety of pressure connections and electrical outputs.

This product is well designed, not only has a compact structure, but also has excellent performance. It is mainly used in water-cooled screw units, ground source heat pumps, freezers, ice machines, etc. Its unique anti-condensation design provides pressure protection for the safe and efficient operation of the equipment. It can directly replace many similar imported products.

Product Features

1	Unique anti-condensation design
2	Compact appearance, suitable for occasions with small installation space
3	A variety of pressure interfaces are available
4	A variety of electrical output methods are available
5	Wide operating temperature range
6	Good long-term stability

 

Technical Parameters

Pressure Range	0~50bar Gauge
Output Signal	4~20mA
Supply Power(U+)	12~30VDC
Over Voltage	30VDC
Backward Voltage	-30VDC
The accuracy of normal temperture	Default ±0.5%F.S
Medium Temperture	-35~105ºC
Ambient temperature	-20~85ºC
Storage temperature	-40ºC~105ºC
Long-term stability	±0.5%FS/year
Response time	(10%~90%)≤10ms
Overload Pressure	≥150%F.S
Breakdown Pressure	≥200%F.S
Pressure Connection	7/16-20UNF External/Internal thread etc.
Electrical Connection	Packard connector etc
Liquid seal ring	Default CR seal ring
Housing Material	Default 304 SS, 316L SS or other options
Insulation Resistance	≥100MΩ@100VDC
Electric Strength	Internal TVS tube Protection, at 50VDC, in 1 minute, no breakdown and flashover
Vibration	10g,5~2000Hz
Impact	20g, 11ms half sine
IP Grade	≥IP65

 

Product Profiles (Unit:mm)

Ordering Guide

Model	Type
HPM135	Refrigeration industry pressure transmitter
	Range	Measuring Range
	(0~X)bar	Fill out X directly
		Code	Output Signal
		B1	(4~20)mA
		B3	(0~10)V
		B6	(0.5~4.5)V
			Code	Process Connection
			P3	G1/4 Male
			P8	NPT1/4 Male
			P10	7/16-20UNF-Male
			P11	7/16-20UNF-Female
				Code	Electrical Connection
				C1.1	DIN43650 type C
				C2	Cable outlet
				C4	Parker Connector
				C5	M12x1
					Code	Housing Material
					S4	304
					S6	316L
						Code	Seal Ring
						CR	CR neoprene
						X	Others
							Code	Additional Functions
							V24	24V power supply(default)
							V5	5V power supply
							QF	With factory report
E.g. :HPM135	(0~50)bar	B1	P11	C4	S4	CR	V24

 

Company Profile

FAQ

1.    Q: Are you manufacturer or trading company?         A: We are manufacturer which focuses on sensor for 10 years. 2.    Q: What's your quality control system?         A: MC, ISO9001, CE Certificated. 3.    Q: What is the warranty of your products?         A: Our warranty time is 18 months after shipment.   4.     Q: What is lead time of your product?          A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.   5.     Q: Do you provide customized products?          A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.   6.     Q: What is your MOQ?         A: We have no MOQ limit, small quantity order is acceptable.   7.      Q: What's the transport?                                                                       A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.   8.      Q: What is your terms of payment ?            A: We could accept T/T, Paypal, WU.