Type: | Level sensor |
---|---|
Component: | SemiConductor Type |
For: | Ceramic Pressure Transmitter |
Output Signal Type: | Analog Type |
Production Process: | Ceramics |
Material: | Ceramics |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Pressure Range | ||||||
Rated range (Gauge,kPa) |
50 | 100 | 200 | 500 | 1000 | 2000 |
Min range (Gauge, kPa) |
20 | 60 | 120 | 250 | 500 | 1000 |
Overload (kPa) | 100 | 200 | 400 | 1000 | 1500 | 3500 |
Note:The measuring unit can be converted into mmH2O@ 4ºC, inH2O@4ºC etc When m, mm, etc. are used as units, please give the density value of the measuring medium |
Measurement Medium | |
Medium Type | Any of various liquids compatible with contact materials |
Output Signal/Power Supply | |
Standard | Two wires:4~20mADC /Vs=10~30Vdc |
Standard | Two wires:4~20mADC+HART /Vs=12~32Vdc |
Standard | Three wires:0~5V etc /Vs=10~30Vdc |
Standard | Four wires:Modbus-RTU/RS485 /Vs=3~8Vdc or 10~30Vdc |
Charatistics | |
Accurate | ±0.5%F.S.(Typical) ±0.2%F.S.(HART) * Accuracy refer to IEC 60770(nonlinear, hysteresis, repeatability) |
Load Resistant | 4~20mADC two wires:RL≤(U-10)/0.02Ω 4~20mADC+HART two wires:RL≤(U-12)/0.02Ω Voltage three wires:RL>10kΩ |
Long Stability | ±0.2%FS/year |
Response Time | About 1ms |
Boot time | ≤3s |
Temperature drift Charatistics | |
Temperature Compensation Range | -20~80ºC |
Zero Temperature drift | ±1.0%FS(within Temperature Compensation Range) |
Full Temperature drift | ±0.8%FS(within Temperature Compensation Range) |
Environment | ||
Temperature Range | Working Environment Temperature: -10~70ºC Measurement Medium Temperature: -10~70ºC Storage Temperature: -30~80ºC |
|
Protection Grade | IP68 | |
Electrical Protection | ||
Short-circuit protection | Permanence | |
Reverse Polarity Protection | No damage, circuit not working | |
Electromagnetic Compatibility | Compliance EN61326 | |
Mechanical stability | ||
Vibration | 20g(20~5000Hz) | |
Shock Resistant | 20g(11ms) | |
Insulation | ||
Insulation Resistant | >100MΩ,500VDC | |
Insulation Strength | 500VAC 50Hz Test voltage,1min no breakdowns and arcs |
Code | Position | Instruction |
DF | Probe Housing | PVDF, density 1.78g/cm3, Shore hardness 77, suitable temperature -10 ~ 140ºC |
PC | PVC, density 1.45g/cm3, Shore hardness 79, suitable temperature -10 ~ 70ºC | |
PP | PP, density 0.91g/cm3, Shore hardness 72, suitable temperature -10 ~ 100ºC | |
PTFE | PTFE, density 2.17g/cm3, Shore hardness 54 ~ 60, suitable temperature -200 ~ 260ºC | |
M5 | Sensor | Ceramic Al2O3 96% |
F1 | O-ring | FKM(Temperature range -20~200ºC) |
F2 | FFKM(More anti-corrosion,temperature range -25~300°) | |
FE | Cable | PTFE cable,outer diameter(7.2±0.2)mm |
PU | PU cable,outer diameter(7.2±0.2)mm |
Probe | Cable | ||||||
Housing Material | PVC | PP | PVDF | Cable material | PTFE | PU | |
Weight | ~480 | ~430 | ~530 | Weight(1m) | ~60 | ~50 |
Thread installation (W1) dimension |
![]() weight:~450g |
Suppliers with verified business licenses