HPM413 liquid level transmitter is a fully sealed submersible structure and uses an anti-corrosion ceramic piezoresistive pressure sensor. The probe put into the measured medium is made of 316L or titanium alloy. Cables are made of PTFE or polyurethane cables.
This product is mainly used in sewage, seawater and other media and all high-demand liquid level measurements. The shell of this product adopts a full welding process, and the connections of the shell, wires and other links are reliably sealed with multiple designs. The interior adopts a full potting process to ensure that the product has a long service life and is widely used in the chemical industry, water treatment, environmental protection, medicine, industrial process control and many other occasions
Product Features
- Ceramic (96% Al2O3) piezoresistive sensor
- High cost performance
- 22mm diameter, suitable for 1-inch pipe installation
- Quasi-flush membrane structure, anti-clogging
- Anti-corrosion, wear-resistant
- Full welding process
- Full potting process, containing polymer sieve to prevent condensation
- Multiple protection and sealing structure design
Technical Parameters
Measuring Range |
Rated range (Gauge pressure,kPa*) |
50 |
100 |
200 |
500 |
1000 |
2000 |
Min Range (Gauge pressure,kPa) |
20 |
60 |
120 |
250 |
500 |
1000 |
Overload(kPa) |
100 |
200 |
400 |
1000 |
1500 |
3500 |
*The measurement unit can be converted to mH2O@4ºC, inH2O@4ºC, m, mm, etc. When using m, mm, etc. as the unit, please give the density value of the measurement medium. |
Measuring Medium |
Various liquids compatible with contact materials |
Output Signal/Power Supply (1) |
4~20mADC / Vs=10~30 VDC |
Output Signal/Power Supply (2) |
4~20mADC+HART / Vs=12~32 VDC |
Output Signal/Power Supply (3) |
0~5VDC etc. /Vs=10~30 VDC |
Output Signal/Power Supply (4) |
Modbus-RTU/RS485 /Vs =3~8 VDC or 10~30 VDC |
Accuracy *Accuracy complies with IEC 60770 (non-linearity, hysteresis, repeatability) |
±0.5%FS (typical) |
Product Profiles (Unit:mm)
Code |
Part |
Note |
S6 |
Probe shell |
316L |
TI |
Titanium alloy |
M6 |
Pressure sensor |
Ceramic, Al2O3 96% |
FK |
Pressure sensor sealing ring |
Fluorine rubber FKM(working temperature: -20~200ºC) |
FF |
Perfluoro rubber FFKM(More corrosion resistant, working temperature: -25~300ºC) |
C2U |
Cable |
PU polyurethane cable,external diameter(7.2±0.2)mm |
C2F |
PTFE cable,external diameter(7.2±0.2)mm |
Installation
1. Threaded M ounting Parts(W1)
2. Top connection heavy hammer W2)
3. Level transmitter
4. Cable clip(W8)
5. Protective tube
6. Bottom connection heavy hammer(W3)
(1,2,4,5,6 needs to purchased separately)
Notes:If heavy hammer in bottom, need to consider the influence of the height of the bottom hammer on the height from the sensing diaphragm to the bottom of the measurement medium.
Other Recommends
Company Profile
FAQ
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on sensor for 10 years.
2. Q: What's your quality control system?
A: MC, ISO9001, CE Certificated.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
4. Q: What is lead time of your product?
A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.
5. Q: Do you provide customized products?
A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.
6. Q: What is your MOQ?
A: We have no MOQ limit, small quantity order is acceptable.
7. Q: What's the transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.
8. Q: What is your terms of payment ?
A: We could accept T/T, Paypal, WU.