Product Overview:
HPM47W-CSN submerged pressure transmitter is all sealed submerged structure and adopts ceramic capacitor pressure sensor. The probe threw in the measured medium adopts 316L or titanium alloy. The gas-guide cable adopts special anti-corrosive liquid level wire, which is mainly used for liquid level measurement of acid, base and other corrosive medium. The shell of the product adopts all-welding technology, and at the same time, the connection of the shell, wire and other links is multi-designed for reliable sealing. The internal adopts all-filling sealing technology, which ensures that the product has a good service life, and is widely used in chemical industry, water treatment, environmental protection, medicine, industrial process control and medicine industries etc.
Features:
·High-purity ceramic material (99.99% Al2O3) sensor
·Whole welding process
·Wide range from 0.5 meter to 400 meters
·Whole potting process, high molecular sieve, prevent dew
Parameters:
Pressure Range(Ceramic Capacitor) |
Pressure range Gauge Pressure(kPa) |
10 |
20 |
40 |
100 |
200 |
400 |
1000 |
2000 |
4000 |
Min pressure range Gauge Pressure(kPa) |
5 |
10 |
20 |
50 |
100 |
200 |
500 |
1000 |
2000 |
Overload (kPa) |
400 |
600 |
600 |
1000 |
1800 |
2500 |
4000 |
4000 |
6000 |
Measurement Medium |
Medium Type |
Any of various liquids compatible with contact materials |
Output Signal/Power Supply |
Standard |
Two wires:4~20mADC /Vs=10~30Vdc |
Standard |
Two wires:4~20mADC+HART /Vs=12~32Vdc |
Standard |
Three wires:0~5V etc /Vs=10~30Vdc |
Standard |
Four wires:Modbus-RTU/RS485 /Vs=3~8Vdc or 10~30Vdc |
Charatistics |
Accurate |
±0.2%F.S.(Typical) ±0.1%F.S.(HART) * Accuracy refer to IEC 60770(nonlinear, hysteresis, repeatability) |
Load Resistant |
4~20mADC two wires:RL≤(U-10)/0.02Ω 4~20mADC+HART two wires:RL≤(U-12)/0.02Ω Voltage three wires:RL>10kΩ |
Long Stability |
±0.1%FS/year |
Response Time |
About 1ms |
Boot time |
≤3s |
Temperature drift Charatistics |
Temperature Compensation Range |
-20~80ºC |
Zero Temperature drift |
±1.0%FS(within Temperature Compensation Range) |
Full Temperature drift |
±0.8%FS(within Temperature Compensation Range) |
Environment |
Temperature Range |
Working Environment Temperature: -20~85ºC Measurement Medium Temperature: -20~85ºC Storage Temperature: -30~85ºC |
Protection Grade |
IP68 |
Electrical Protection |
Short-circuit protection |
Permanence |
Reverse Polarity Protection |
No damage, circuit not working |
Electromagnetic Compatibility |
Compliance EN61326 |
Mechanical stability |
Vibration |
20g(20~5000Hz) |
Shock Resistant |
20g(11ms) |
Insulation |
Insulation Resistant |
>100MΩ,500VDC |
Insulation Strength |
500VAC 50Hz Test voltage,1min no breakdowns and arcs |
Strcture Material:
Code |
Position |
Instruction |
S6 |
Probe Housing |
316L |
TI |
|
Titanium Alloy |
M6 |
Sensor |
Ceramic Al2O3 99.9% |
F1 |
O-ring |
FKM(Temperature range -20~200ºC) |
F2 |
|
FFKM(More anti-corrosion,temperature range -25~300ºC) |
FE |
Cable |
PTFE cable,outer diameter(7.2±0.2)mm |
PU |
|
PU cable,outer diameter(7.2±0.2)mm |
Weight(Unit:g)
Probe |
Housing Material |
316L |
Titanium Alloy |
Weight |
~660 |
~400 |
Cable |
Cable material |
PTFE |
PU |
Weight(1m) |
~60 |
~50 |
Structure Drawings:
* The size is the distance between the induction diaphragm and the bottom
Installation(Unit:mm)
Thread installation (W1) dimension |
![Titanium Level Sensor 316L Level Transmitter Ceramic Membrane Level Transducer High Anticorrosive Liquid Sensor Ceramic Clog-Free](//www.micstatic.com/athena/img/transparent.png) weight:~450g |
1.Used for fixing and supporting the whole product on the top
2. Besides G1 thread, other threads can be customized if needed
1. Used for fixing products in some areas with fast flow rate
2. Used for fixing products in some medium with excessive density
3. Avoid measurement errors caused by floating and moving products
4. Up to 3 hammers can be connected
Used to secure and support the entire product on top
- Threaded Mounting (W1) 4. Wire clamp (W8)
- Top connecting weight hammer (W2) 5. Protective tube
- Pressure transmitter 6. Bottom connection heavy hammer (W3) *
Electrical Connection:
4 ~ 20mADC two-wire output transmitter electrical wiring diagram
Three-wire voltage output transmitter electrical wiring diagram
MODBUS-RTU /RS485 output transmitter Electrical wiring diagram
Ordering Guide:
Certification:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on sensor for 10 years.
2. Q: What's your quality control system?
A: MC, ISO9001, CE Certificated.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
4. Q: What is lead time of your product?
A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.
5. Q: Do you provide customized products?
A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.
6. Q: What is your MOQ?
A: We have no MOQ limit, small quantity order is acceptable.
7. Q: What's the transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.
8. Q: What is your terms of payment ?
A: We could accept T/T, Paypal,