Customization: | Available |
---|---|
Type: | Remote Pressure Transmitter |
Structure Type: | Diffused Silicon Pressure Transmitter |
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
- RS485 communication interface or HART communication protocols
- Adopt digital compensation and nonlinear calibration
- Digital wide temperature compensation from minus 10 degrees to 80 degrees
- Support networking application
- All stainless steel structure, small volume, light weight
- Support customization for special requirements, suit for various occasions
Measuring Medium | Liquid, Gas or Steam | |
Pressure Range | -100kPa...0~0.1...100MPa | |
Overload | 1.5 times pressure range of full scale | |
Pressure Type | Gauge, Absolute or Sealed Gauge | |
Accuracy | ±0.2%FS(Typical), ±0.5%FS(Maximum) | |
Long-term Stability | ±0.2%FS/year | |
Temperature Coefficient of Zero | ±0.03%FS/ºC(Reference 25ºC) | |
Temperature Coefficient of Full Scale | ±0.03%FS/ºC(Reference 25ºC) | |
Compensation Temperature | -10~80ºC | |
Working Temperature | -20~85ºC | |
Storage Temperature | -30~100ºC | |
Supply Voltage | 24VDC(12~28V) | |
Output Signal | 4~20mADC, RS485 interface or HART Protocol | |
Load Capacity | ≤(U-12)/0.02Ω; RS485 main line can be connected to 99 transmitters | |
Insulation Resistance | 100MΩ, 500VDC | |
Vibration | 20g(20~5000Hz) | |
Impact | 20g (11ms) | |
Protection of Shell | IP65 | |