| Customization: | Available |
|---|---|
| Type: | Explosion-proof Pressure Transmitter |
| Structure Type: | Capacitive Pressure Transmitter |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
HPM88 pressure transmitter adopts capacitive ceramic measuring unit. This measuring unit ensures economical, reliable and safe process control in pressure instrumentation and customized applications.
Ceramics have the characteristics of high elasticity, wear resistance, corrosion resistance, fast heat dissipation, etc., which makes the pressure transmitter have very good thermal stability and can be used normally in the range of -40 to 125 degrees Celsius with low temperature drift. At the same time, the overload resistance can reach dozens of times of the full range under small range, which solves the problem of poor overload capacity in small range and is very suitable for micro-pressure measurement.
| Measuring Medium | Liquid, Gas, Steam |
| Pressure Range | -100kPa...0~2kPa...7MPa |
| Pressure Type | Gauge, Absolute |
| Accuracy | ±0.2%FS(Representative); ±0.5%FS (Maximum) |
| Long-term Stability | ±0.1%FS/year |
| Temperature Coefficient of Zero | ±0.01%FS/ºC(Reference 25ºC) |
| Temperature Coefficient of Full Scale | ±0.01%FS/ºC(Reference 25ºC) |
| Compensation Temp | -20~80ºC |
| Medium Temp | -40~125ºC |
| Supply Voltage | 24VDC |
| Output Signal | 4~20mADC with HART |
 |
|
||||||
| Item NO. | Type | ||||||
| HPM88 | Pressure Transmitter | ||||||
| Pressure Range | Measuring Range | ||||||
| (0~X)kPa | Fill out X directly | ||||||
| Code | Output Signal | ||||||
| B1 | (4~20)mA | ||||||
| B3 | (0~10)V | ||||||
| B4 | (0~5)V | ||||||
| B5 | (1~5)V | ||||||
| Code | Thread Spec | ||||||
| P1 | M20×1.5 | ||||||
| P4 | G1/2 | ||||||
| Code | Electrical Connection | ||||||
| C2 | Cable Outlet | ||||||
| Code | Structure&Material | ||||||
| Diaphragm | Shell Material | ||||||
| M6 | ceramic capacitor | Customization | |||||
| Code | Additional Functions | ||||||
| G | Gauge Pressure(Default) | ||||||
| A | Absolute Pressure | ||||||
| S | Sealed Gauge Pressure | ||||||
| v | Fluororubber O-Ring(Default) | ||||||
| S4 | 304 shell | ||||||
| S6 | 316L shell | ||||||
| PP | PP shell | ||||||
| FE | PTFE shell | ||||||
| DF | PVDF shell | ||||||
| HPM88 | (-2~2)kPa | B1 | P1 | C2 | M6 | G v S4 | |
){kind=link}