| Customization: | Available |
|---|---|
| Type: | Medium & High Temperature Pressure Transmitter |
| Structure Type: | Diffused Silicon Pressure Transmitter |
|
Still deciding? Get samples of US$ 120/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
HPM711 flush diaphragm sanitary pressure transmitter uses a flush diaphragm to directly sense the pressure signal, uses a silicon pressure chip as the sensitive element, and uses standard silicone oil or sanitary oil as the pressure transmission medium.
HPM711 with flat diaphragm is specially designed for measuring viscous, pasty, viscous, crystallized, particle-containing media that can block the pressure channels of conventional process connections. For high-temperature media up to 150°C, this product also has models with integrated radiators to choose from. At the same time, the HPM711 flush diaphragm sanitary pressure transmitter directly feels the pressure due to the exposed diaphragm on the thread end face, which is especially suitable for medical, food industry which has hygienic requirements, and viscous fluid pressure and level measurement and without problems such as scaling, blockage, and sanitation.
| Measuring Medium | Various liquid, gas, or steam compatible with contact material |
| Measuring Range | -100kPa…0~10kPa…60MPa(G) 0~25kPa…10MPa(A) |
| Overload | 1.5 times of full scale |
| Output Signal/Power supply | 4~20mADC/ Vs=8~30 VDC 0~10VDC /Vs=12~30 VDC 0~5VDC /Vs=8.5~30V or 3.1~8 VDC (Higher than max output voltage 0.4V as least) 4~20mADC + HART / Vs =12~32 VDC |
| Accuracy | ±0.5%FS (typical) ±0.25%FS (optional) |
| Long-term Stability | ±0.50%FS/year,≤100kPa ±0.25%FS/year,>100kPa |
| Compensation temperature range | 5~60ºC |
| Temperature Coefficient of Zero | ±0.4%FS/10ºC(in compensation range,≤100kPa) ±0.3%FS/10ºC(in compensation range,>100kPa) |
| Temperature Coefficient of Full Scale | ±0.3%FS/10ºC(in compensation range) |
| Operation Temperature | -40~80ºC |
| Medium Temperature | -40~100ºC(without heat sink) -40~150ºC(with heat sink) |
| Storage Temperature | -40~100ºC |
| Protection Grade | IP65 for DIN43650 electronical connection (code: C1) IP69K for M12*1 electronical connection (code C5) IP67 for cable outlet (code C2) |
| Short circuit protection | Always |
| Reverse polarity protection | No damage, will not work if reverse |
| Electromagnetic Compatibility | EN 61326 |
| Vibration | 20g(20~5000Hz) |
| Shock resistance | 50g(11ms) |
| Insulation resistance | >200MΩ @500VDC |
| Dielectric strength | <2mA @500VAC 1min |
|
Code
|
Type |
|
|||||||
| HPM711 | flush diaphram pressure transmitter | ||||||||
| Range | Measuring Range | ||||||||
| (X1~X2)bar | X1 is the lowest value X2 is the highest value |
||||||||
| Code | Output singnal | ||||||||
| B1 | (4~20)mA | ||||||||
| B3 | (0~10)V | ||||||||
| B4 | (0~5)V | ||||||||
| B5 | (1~5)V | ||||||||
| B15 | (1~10)V | ||||||||
| Code | Pressure interface | ||||||||
| KG12 | G1/2 | ||||||||
| KG1 | G1 | ||||||||
| KHG1 | G1 Hygienic | ||||||||
| Code | Electronical Connection | ||||||||
| C1 | DIN43650 | ||||||||
| C2 | Cable outlet | ||||||||
| C5 | M12×1 | ||||||||
| C5X | M12×1 with cable | ||||||||
| Code | Pressure interface material | ||||||||
| S6 | 316L | ||||||||
| X | Customized | ||||||||
| Code | Shell material | ||||||||
| S4 | 304 | ||||||||
| S6 | 316L | ||||||||
| Code | Heat sink | ||||||||
| Y | With | ||||||||
| N | Without | ||||||||
| Code | Others | ||||||||
| G | Gauge | ||||||||
| S | Sealed gauge | ||||||||
| A | Absolute | ||||||||
| J25 | 0.25G accuracy | ||||||||
| J5 | 0.5G accuracy | ||||||||
| NB | NBR sealing ring | ||||||||
| FK | FKM sealing ring | ||||||||
| ED | EPDM sealing ring | ||||||||
| FF | FFKM sealing ring | ||||||||
| QF | With factory report | ||||||||
| Other requests | |||||||||
| eg:HPM711 | (0~1)bar | B1 | KG1 | C1 | S6 | S4 | Y | G J5 NB | |
){kind=link}