1.5 2inch tri-clamp pressure transmitter anti high temperature medium ceramic core

• Customization: Available
• Type: Negative Pressure Transmitter
• Structure Type: Ceramic Pressure Transmitter
• Model NO.: HPM723
• Measuring Medium: Liquid Gas Steam
• Accuracy Grade: 0.5G
• Pressure range: -1…0~0.2…20bar
• IP Rating: IP65
• Certification: ISO9001
• Customized: Customized
• Sensor core: Ceramic
• Pressure Reference: Gauge, Absolute, Sealed Gauge
• Accuracy: 0.5%F.S.
• Output/Supply(1): 4~20mADC / Vs=10~30 VDC
• Output/Supply(2): 0~10VDC /Vs=12~30 VDC
• Output/Supply(3): 0~5VDC /Vs=8.5~30V
• Output/Supply(4): odbus-RTU/RS485/Vs=3~8VDCor10~30VDC
• Electrical Connection: M12*1, DIN43650, cable outlet, etc.
• Ambient Temp: -30~85ºC
• Medium Temp: -40~130ºC
• Shell Material: 304, 316L
• Pressure interface: Clamp
• Protection of Shell: IP65
• Transport Package: Carton
• Trademark: HIGHJOIN
• Origin: China
• HS Code: 90262010
• Production Capacity: 50000 Pieces / Year

Product Description

HPM723 ceramic sensor core tri-clamp type pressure transmitter uses advanced ceramic piezoresistive core as sensitive element, chuck installation, flat membrane structure design. Ceramics have the characteristics of high elasticity, wear resistance, corrosion resistance, fast heat dissipation, etc., which makes the transmitter have very good thermal stability, so that it can be used normally in the range of -40 to 130 degrees Celsius, with low temperature drift.

Product Features

1. All stainless-steel housing
2. Anti-corrosion ceramic (96% Al₂O₃) sensor
3. Quasi-flat membrane structure, easy to clean, anti-clogging and anti-scaling
4. Anti-corrosion, wear-resistant, anti-negative pressure
5. Wide applicable medium temperature range, -40~130ºC
6. Support negative pressure, absolute pressure or compound pressure measurement
7. Support multiple output signals and multiple electrical interfaces
8. Special waterproof breathable design

 

Product Parameters

Range
Rated range (bar)	0.5	1	2	5	10	20
Minimum range (bar)	0.2	0.5	1	2	5	10
Overload(bar)	1	2	4	10	15	35
Vacuum Capacity(bar)	-0.1	-0.5	-1	-1	-1	-1
Note: Compound pressure can be measured, for example -0.1 to 5 bar For other ranges, please consult sales engineers

Measuring Medium	Various liquid, gas, or steam compatible with contact material
Output Signal/Power supply	2-wire: 4~20mADC/ Vs=10~30 VDC 3-wire: 0~10VDC /Vs=12~30 VDC 3-wire: 0~5VDC /Vs=8.5~30V 4-wire: Modbus-RTU/RS485/Vs=3~8VDCor10~30VDC
Accuracy	±0.5%FS
Long-term Stability	±0.3%FS/year
Temperature Coefficient of Zero	≤±0.4%FS/10ºC(25~85ºC,ref 25ºC)
Temperature Coefficient of Full Scale	≤±0.15%FS/10ºC(-10~85ºC,ref 25ºC)
Ambient Temperature	-40~85ºC
Medium Temperature	-40~130ºC
Storage Temperature	-40~85ºC
Protection Grade	IP65

Dimension (Unit:mm)

Ordering Guide

Code	Type
HPM723	Ceramic tri-clamp type pressure transmitter
	Range	Measuring Range
	(X1~X2)bar	X1 is the lowest value X2 is the highest value
		Code	Output singnal
		B1	(4~20)mA
		B3	(0~10)V
		B4	(0~5)V
		B5	(1~5)V
		B7	RS485
			Code	Pressure interface
			K505	Tri-Clamp 1-1/2″ ISO 2852 DN38 DIN 32676 DN32~40
			K640	Tri-Clamp 2″ ISO 2852 DN40~51 DIN 32676 DN50
				Code	Electronical Connection
				C1	Hirschmann
				C2	Cable outlet
				C5	M12×1
				C5X	M12×1 with cable
					Code	Pressure interface material
					S4	304
					S6	316L
					HC	Ha C
						Code	Shell material
						S4	304
						S6	316L
							Code	Others
							G	Gauge(by default)
							A	Absolute
							T3	3 pcs cooling fins
							NT	without cooling fins
							QF	with factory report
							FK	FKM sealing ring
							FF	FFKM sealing ring
							ED	EPDM sealing ring
							SI	Silicone Rubber sealing ring
								Other requests
eg:HPM723	(0~10)bar	B1	K505	C5	S6	S4	G T3 FK

Company Profile

FAQ

1.    Q: Are you manufacturer or trading company?
        A: We are manufacturer which focuses on sensor for 10 years.

2.    Q: What's your quality control system?
        A: MC, ISO9001, CE Certificated.

3.    Q: What is the warranty of your products?
        A: Our warranty time is 18 months after shipment.
 

4.     Q: What is lead time of your product?

         A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.
 

5.     Q: Do you provide customized products?

         A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.
 

6.     Q: What is your MOQ?

        A: We have no MOQ limit, small quantity order is acceptable.
 

7.      Q: What's the transport?                                                              

        A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.
 

8.    Q: What is your terms of payment ?
        A: We could accept T/T, Paypal, WU.