Features:
- Compact structure, extra-mini. 29mm or 37mm high.
- 0.25% F.S. high accuracy.
- All streamless steal.
- IP67 available.
- Low temperature drift with wide compensated range -10~80ºC
Suitable for:
- Extra narrow space with high accuracy requests.
Product Overview:
HPM1301 micro pressure transmitter adopts a unique ultra-small structural design and is miniature in size. It uses high-performance silicon piezoresistivesensors and high-precision electronic conditioning circuits, assembled and produced through strict technological processes.
The product has an all-stainless steel structure with a variety of output signals to choose from. It also has wide temperature range compensation, and high overall accuracy.
In addition, this product is all laser welding along with internal potting process, which is moisture-proof and earthquake-proof, and the overall protection level is higher. It can be used for gas, liquid, steam measurement .
This product is not only has a compact structure, but also has excellent performance, making it very suitable for occasions with small installation spaces.
Parameters:
| Pressure Range (Gauge Pressure) |
| Rated measuring range(MPa) |
0.2 |
0.35 |
0.7 |
1 |
2 |
3.5 |
7 |
10 |
20 |
40 |
| Minimum measuring range(MPa) |
0.05 |
0.2 |
0.35 |
0.7 |
1 |
2 |
3.5 |
7 |
10 |
20 |
| Overload(MPa) |
0.4 |
0.7 |
1.4 |
2 |
4 |
7 |
14 |
20 |
40 |
60 |
Note:
1. Support composite pressure measurement
2. Support customized intermediate range |
| Pressure Range (Absolute Pressure) |
| Rated range(MPa) |
0.2 |
0.35 |
0.7 |
1 |
2 |
3.5 |
7 |
10 |
| Minimum measuring range(MPa) |
0.05 |
0.2 |
0.35 |
0.7 |
1 |
2 |
3.5 |
7 |
| Overload(MPa) |
0.4 |
0.7 |
1.4 |
2 |
4 |
7 |
14 |
20 |
| Note : Support customized intermediate range |
| Measuring Medium |
| Medium type |
Various liquids and gases compatible with contact materials |
| Output Signal/Power Supply |
| Standard |
2-wire:4~20mA / Vs=10~30 V |
| Standard |
3-wire:0~5V / Vs=8.5~30V or Vs=3.1~8V(At the same time, it needs to be 0.4V higher than the maximum output voltage.) |
| Standard |
3-wire:0~10V / Vs=12~30 V |
| Standard |
4-wire:RS485 / Vs=6~30V |
| Performance |
| Accuracy |
±0.25%FS @25ºC |
| Long-term Stability |
±0.25%FS/year |
| Resolution ratio |
Unlimited, only affected by output noise level, usually ≤0.01% |
| Response time |
About 1ms |
| Start-up time |
≤200ms |
| Temperature drift characteristics |
| Compensation temperature range |
-10~80ºC |
Temperature coefficient of Zero
|
±1.0%FS(Reference 35ºC) |
Temperature coefficient of full scale
|
±1.0%FS(Reference 35°C, warm-up range) |
| Environmental conditions |
| Temperature range |
Ambient temperature:-40~85ºC
Medium temperature:-40~100ºC
Storage temperature: -40~85ºC |
| Protection grade |
IP67 *Seal gauge pressure and absolute pressure types only |
| Electrical protection |
| Short circuit protection |
Permanent |
| Reverse polarity protection |
No damage, circuit does not operate |
| Electromagnetic compatibility |
Conforms to EN 61326 |
| Mechanical stability |
| Vibration |
10g(20~2000Hz) |
| Shock resistance |
100g(11ms) |
| Insulation properties |
| Insulation resistance |
>20MΩ @500VDC |
| Dielectric strength |
<2mA @ 500VAC 1min |
Profiles:
Ordering Guide:
| Item No. |
Type |
|
| HPM1301 |
Micro Pressure Transmitter |
| |
Pressure Range |
Measuring Range |
|
| (0~X)MPa |
Fill out X directly |
| |
Code |
Output Signal |
|
| B1 |
(4~20)mA |
| B3 |
(0-10) V |
|
| B4 |
(0-5)V |
| B5 |
(1-5)V |
| B6 |
(0.5~4.5)V |
| B7 |
RS485 |
| |
Code |
Thread Spec |
|
| P2 |
M20*1.5 |
| P4 |
G1/2 |
| |
Code |
Electrical Connection |
|
| C2C |
side direct cable outlet |
| C2D |
top direct cable outlet |
| |
Code |
Material |
Structure&Material |
| S4 |
304 |
| S6 |
316L |
| |
Code |
Sensor |
|
| M1 |
diffusion silicon diaphram |
| |
Code |
Additional Functions |
| G |
Gauge Pressure(Default) |
| A |
Absolute Pressure |
| e.g.: HPM1301 |
(0~10)Mpa |
B1 |
P2 |
C2C |
S4 |
M1 |
G |
Related Products:
HPM1300(Click):
Also mini design, minimum height is only 44mm.
HPM130(Click):
78mm~93mm high.
DIN43650 Hirschman port avaliable.
Quality first:
Certification:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on sensor for 10 years.
2. Q: What's your quality control system?
A: MC, ISO9001, CE Certificated.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
4. Q: What is lead time of your product?
A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.
5. Q: Do you provide customized products?
A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.
6. Q: What is your MOQ?
A: We have no MOQ limit, small quantity order is acceptable.
7. Q: What's the transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.
8. Q: What is your terms of payment ?
A: We could accept T/T, Paypal, WU.
){kind=link}